on ARC7 project building of three LNG 172,5k (Hull 2514/2515/2516) on DSME shipyard (for Novatek). Dual Class BV and RMRS (AUT-IMS, AVM-IPS, MONSHAFT,Anti-ice, winterization(-52), etc). 3 ABB Azipods x 17MW with ASC6080 frequency converters, Wartsila DFE 14MW-4pcs, 9MW-2pcs. ABB HV SWBD 6.6 kV, Dual Engine Room. Responsibility: approval of drawings, procedures, OTP, FMEA,HAZOP, etc. Participate in overseas and domestic FAT. Commissioning/Supervision/Mechanical Completion.

Chief ETO on 6-th gen. UDW Drillships "Pacific Bora", "Pacific Santa Ana" with Kongsberg DP3.

Head of electrical department, report directly to OIM. Comply with the permit to work and isolation systems. Carry out periodic maintenance according to the Rig Maintenance System (MAXIMO), tracking the spare parts for department, budget planning. Maintenance and repair all electrical/electronic equipment and automation (220, 480, 600VAC), ABB drilling ACS800 VFD swbd's, transformers, ABB switchboards, AC motors, CAT 3512 DG's, HVAC system, Jacking system, UPS’s, drill floor equipment (TDS-8SA, ADS-10T, ST-120, etc.), Favelco diesel cranes, BOP Cameron

ETO(Electrical engineer) on passenger vessel “Allure of the seas”. Carry out periodic maintenance according to the AMOS, troubleshoot and repair all electronic/electrical equipment. Carry out maintenance and repair on electrical/electronic components of marine equipment: Kongsberg K-Chief 700 automation system, ABB Azipods (20MW) 3pcs, ABB Bow thrusters – 4pcs, Diesel engines (Wartsila) - 6pcs, HV SWBD’s (11kV), LV SWBD’s (440v, 220v, 110v), UPS’s, fire system Autronica, watertight doors, navigation equipment, passenger and service elevators (Kone), HVAC system, Evaporator system, CO2 system, FO/LO systems, Frequency Converters (ABB, Schneider, Vacon), Steam Boiler, etc

participate in commissioning of “Pacific Meltem”, tests, sea trials, DST, SIT of electronic&electrical systems. Maintenance, troubleshooting, fixing problem all electronic&electrical systems like as: PMS (K-Chief 700 Kongsberg) Marine Navigation DP32 System: K-Thrust-OS; K-Pos-OS; C-Joy control; Autopilot (Kongsberg); GPRS, Gyro’s, MRU’s, HIPAP Mk2 (transducer Hipap-500); RMS; 6 x Marine Azimuth Thruster propulsion drive system ACS6000 AD. Kongsberg ESD. ABB HV SWBD’s 11kV, ABB drilling swbd’s. Work with fiber optical net communication systems with different IP/TC protocols, LAN fiber optical convert equipments PLC drive equipments (Siemens S7-300, S7-400; Kongsberg, ABB, Allen Bradley, Rolls Royce ); 5th and 6th generation BOP MUX with PLC GeFanuc 90-70(Silvertech) at 5th gen and PLC AAdvance (Rockwell) at 6th gen Troubleshoot, repair, install of Fire and Gas system by Autronica AutoSafe Config Software. Gas Detect System (H2S & HC) Telecommunication systems: v-Sat Satellite Intranet communication and Satellite TV system; Digital PABX telephone system; calibration of level sound system of Tanks. Troubleshoot, restore systems and dates by ABB Software DriveWindow2.3, Control Builder5.0.2 of drilling equipment: 4 x VFD switchgear ABB ACS800LC; in propulsion system ABB Thruster ACS6000. Troubleshoot and repair SCADA system on Siemens Step7. Work with NOV equipment: 4 x Cyber base servers Main & Aux. well chairs; DCDA system; SDI system; (Draw works, Top Drives, Hydrocracks, Hydro tang, Rotary tables,..); Sdi VEGA instrumentation; Mud Cement Mix Storage Bulk Systems; NOV 85t cranes, BOP crane, Pipe handling, Riser gantry crane;Catwalks Strong knowledge of Simatic S7 (Siemens PLC), GE Fanuc, Allen-Bradley(Rockwell), INTOUCH, GP-PRO-Ex, PowerSuit, ALSPA controllers, instrumentation Carry out periodic maintenance (PM) according to the SAP, prepare orders for spare parts. Fully understand, practically using of Permit to Work (PTW) in daily routine.

Assist the Commissioning team in Korea, participation in commissioning different kind of electrical/electronic systems, drilling control systems, participation in Sea Trials, DP test, anchor test, etc • Perform daily inspections and maintenance on electronic equipment. Comply with the permit to work and isolation systems. • Carry out periodic maintenance according to the Rig Maintenance System (RMS), troubleshoot and repair all electronic/electrical equipment. • Carry out maintenance, repair, fault diagnosis, rectification in software if necessary and testing of on electrical/electronic components of Driller’s consoles (Cyberbase), Top Drive System, Drawworks D3000AC, MUD control system, HTWC, HTSB, Hydraracker, SDI, DCI, E-Hawk, HVAC, Choke&Kill, CMC, AHC, HPU, Fingerboard, PCM, RCM, VFD swbd’s, BOP system, Acoustic control POD(Kongsberg), CCTV(hernis), SCADA network, communication and IT systems, etc. • Carry out maintenance and repair on electrical/electronic components of marine equipment: ICMS, Flowserve thrusters system, anchor winch system (RR), Diesel engines (caterpillar), ballast pumps, control panels, HV (11kV) and LV (690) swbd’s equipment (TESYS, SEPAM), cranes NOV (KNBC, Riser crane, BOP crane, offshore cranes), etc. • Install new equipment as required, with regards to electrical wiring, fixtures and junction boxes, etc. • Monitor backlog relating to platform integrated process control and safety systems including ESD and TYCO (F&G system) on Allen-Bradley PLC equipped by Honeywell H2S&HC gas detectors, process metering and analysers, electrical systems, telecom systems, management control and information management systems and all field associated instrumentation. • Strong knowledge of Simatic S7 (Siemens PLC), GE Fanuc, Allen-Bradley(Rockwell), INTOUCH, GP-PRO-Ex, PowerSuit, ALSPA controllers, instrumentation, etc.

certification of high voltage generators, HV&LV motors, HV transformers, HV&LV SW boards, Freq. converters, UPS, control&monitoring systems. Participant of car carriers NB projects. Participation in all kind of Electrical and Machinery surveys, Navigation equipment surveys, sea trials. MOU New Bulding (commissioning) surveyor – all kind of electrical and machinery surveys, drilling equipment surveys. Supply vessel – NB(commissioning) surveyor. DP(dynamic positioning) surveyor (Kongsberg Systems DP-2/3).

On board Responsibilities and Duties, performed by me (maintenance and repair): all electrical equipment and automation, radio and navigation equipment

Maintenance and repair of electrical equipment and automation on ships, Electrical engineer

Novorossiysk Marine University Training Center., certificate

Novorossiysk Marine University Training Center., certificate

Novorossiysk Marine University Training Center., certificate

Admiral Makarov University, certificate

Novorossiysk Marine University Training Center., certificate

Morspas, Moscow, certificate

MME Academy, Malta, certificate

Tradewinds, certificate

ABB Marine, Genova, certificate

ABB Marine,Helsinki, certificate

Admiral Makarov University, certificate

Kongsberg, certificate

SAP, USA, certificate

NOV, Norway, certificate

Converteam,Ragbi, England, certificate

Siemens Moscow training center, certificate

Siemens Moscow training center, certificate

Siemens Moscow training center, certificate

Admiral Makarov University, certificate

Siemens Moscow training center, certificate

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

DNV, competency

Marlins, english test